36. Connect the ground wire.
40. And now the fun part! Remove the
old, bulky turn signals. The less wires
that are showing, the better it is. It will
clean up the appearance of the bike.
43. You point them at a wall to make
sure they are pointing straight.
41. Straighten the passing lamp so that
it is lined up with the turn signal under-
neath it. Then, tighten them together.
37. Before you tighten everything se-
curely, make sure the lights are working.
38. Close the metal cover.
42. However, do not tighten them all
the way until…
Republic H-D is located at:
12707 Southwest Freeway
Stafford, TX 77477
281-295-1000
Toll Free 1-866-843-6481
We thank Republic Harley-Davidson
for supplying us with the "Passing
Lamps/Turn Signal Installation"
article.
39. Put back the side plate of the forks.
Repeat on the other side. Make sure to
tighten both sides.
Blast from the past year 2003